材料準備

　　Material preparation

　　確保防火板和基材處于室溫標準，并維持穩定溫度。

　　Ensure that the fireproof board and substrate are at room temperature standard and maintain a stable temperature.

　　防火板應平放，存放在干燥區域，避免直接放在地上。

　　Fireproof boards should be placed flat and stored in a dry area, avoiding direct placement on the ground.

　　使用托盤存放，防火板面對面、背對背放置，并用廢板保護。

　　Use pallets for storage, place fireproof boards face to face and back-to-back, and protect with waste boards.

　　施工工具

　　Construction tools

　　推薦使用碳鋼制成的切割工具，確保切割位置平整。

　　Recommend using cutting tools made of carbon steel to ensure a smooth cutting position.

　　手動工具應選擇帶有金屬手柄的工具，如手動木鋸。

　　Hand tools should be selected with metal handles, such as manual saws.

　　膠水選擇

　　Adhesive selection

　　選擇與防火板相匹配的優質膠水，以保證粘貼牢度。

　　Choose high-quality adhesive that matches the fireproof board to ensure strong adhesion.

　　切割工藝

　　Cutting process

　　防火板切割前，從背面開始切割，預留至少6mm用于修邊。

　　Before cutting the fireproof board, start cutting from the back and reserve at least 6mm for trimming.

　　注意鋸齒等切割工具的使用，避免割傷防火板。

　　Pay attention to the use of cutting tools such as serrations to avoid cutting the fireproof board.

　　施工流程

　　Construction process

　　分檔 ：根據防火板規格對骨架進行分檔。

　　Classification: Classify the skeleton according to the specifications of the fireproof board.

　　安裝邊框龍骨 ：安裝豎向和橫向龍骨，并與鋼柱固定。

　　Install frame keel: Install vertical and horizontal keels and fix them with steel columns.

　　填充防火材料 ：在墻體內部填充防火材料，如巖棉板。

　　Filling fireproof materials: Fill fireproof materials inside the wall, such as rock wool board.

　　安裝防火板 ：在處理好的基材上粘貼防火板，注意水平和垂直度。

　　Install fireproof board: Stick fireproof board on the processed substrate, paying attention to horizontal and vertical alignment.

　　接縫及護角處理 ：處理防火板之間的接縫，并安裝護角。

　　Seam and corner protection treatment: Treat the seams between fireproof boards and install corner protectors.

　　質量檢驗 ：檢查安裝質量，確保防火板的穩定性和防火性能。

　　Quality inspection: Check the installation quality to ensure the stability and fire resistance of the fireproof board.

　　注意事項

　　Precautions

　　確保墻面或地面平整、無塵、無油污或其他雜質。

　　Ensure that the wall or floor is flat, dust-free, free of oil stains or other impurities.

　　防火板應根據其規格和重量，使用適合的安裝工具和設備。

　　Fireproof boards should be installed using suitable tools and equipment according to their specifications and weight.

　　防火板厚度和材料選擇應滿足防火極限要求和風管構造形式。

　　The thickness and material selection of fireproof board should meet the requirements of fire resistance limit and the construction form of air ducts.

　　使用的法蘭連接件及加固件等材料應為A級不燃材料。

　　The materials used for flange connectors and reinforcements should be Class A non combustible materials.

　　以上步驟和注意事項應遵循相關國家標準和制造商的使用說明。請根據具體施工環境和防火板類型進行適當調整

　　The above steps and precautions should follow relevant national standards and manufacturer's instructions for use. Please make appropriate adjustments based on the specific construction environment and type of fireproof board

　　本文由富美家防火板友情奉獻.更多有關的知識請點擊:http://www.kcrft.cn真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Fumijia fireproof board For more information, please click: http://www.kcrft.cn Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.